Completed Projects

Complete clay tile re-roof on a coastal home addressing cracked and displaced tiles across multiple slopes and compromised underlayment. New installation uses waterproof membrane, corrosion-resistant fasteners, and precision-aligned clay tiles engineered for salt air, UV, and coastal wind exposure.

Full tear-off of aging architectural shingles replaced with a standing seam metal roof. Inspection revealed widespread granule loss and flashing wear from prolonged UV exposure. Concealed-fastener panels installed over synthetic underlayment with pre-fabricated flashing at all valleys and penetrations.

Aging modified bitumen roof with widespread membrane cracking and open seams replaced with a new TPO single-ply system. The structure had chronic leaks across multiple tenant spaces during winter storms. New system features heat-welded seams, tapered insulation for improved drainage, and updated parapet wall flashing.

Light industrial building with aging modified bitumen flat roof treated with a multi-layer high-build elastomeric coating over cleaned and primed substrate with reinforcement fabric. Sealed micro-cracks, added a reflective surface, and extended roof life without requiring full replacement.

Multi-tenant commercial retail building with active flat roof failure. Seasonal rainfall exposed weakened seams and deteriorated flashing along parapet walls. Repairs addressed seam separation, blistering, drainage restrictions, and compromised flashing transitions with industrial-grade membrane patches.

Complete tear-off and new TPO flat roofing system on a commercial retail building showing membrane shrinkage, seam separation, water pooling, and UV cracking. Heat-welded TPO membrane installed over new rigid insulation board with fully integrated flashing at parapet walls, penetrations, and roof drains.

Preventive maintenance visit on a single-family home after debris collected in roof valleys and minor shingle shifts were visible from the ground. Full system inspection, valley and drainage cleaning, flashing resealing, shingle stabilization, fastener sealing, and a written condition report.

Full roof tear-off and new architectural asphalt shingle installation addressing UV damage, granule loss, curling shingles, and deteriorated flashing. Included structural decking evaluation, synthetic underlayment, metal drip edge, valley reinforcement, and ridge ventilation. All work to California building standards.

Targeted repairs on a residential roof in the Skyline neighborhood after ceiling discoloration following rainfall. Inspection confirmed active leaks, lifted shingles, and flashing deterioration around vent stacks. Damaged shingles replaced, new metal flashing installed, and all vulnerable areas reinforced and sealed.

Complete removal of an aging roofing system and installation of a high-performance dimensional asphalt shingle roof. Work addressed deteriorated shingles, moisture penetration, soft decking, and worn underlayment through full tear-off, decking repairs, new synthetic underlayment, metal flashing system, and architectural shingles.